15
Figure 12
Note: The batteries are intended for back-up power only. The
backlight will remain on for 5 seconds when on back up battery power
only. Only when you use power adapter it will the back-light be
continuously on.
3. Keep both sensor and the display console together for 15 minutes to
lock in the sensor signals.
4. (Optional)-Spin the wind cups to simulate wind speed. Take the sensor
to the sink and slowly drip water into the rain bucket to simulate rain.
5. After 15miuntes, follow the mounting instructions for proper placement
of sensors.
Note: Your display console should have readings in all sections. Wind
and Rain will show 0’s (connected) until wind or rian occur or are
simulated.
Note: If you only use battery to power up display console, you must
press LIGHT/SNOOZE key to light up the LCD before press any other
key.
5.5.1 Vertical Desk Stand
The console is best viewed above from a 20 to 30 degree angle.
In addition to the fold out desk stand on the back of the display, console, the
console also includes a vertical desk stand to improve the viewing able on a
desk, as shown in Figure 13.
