25
- In normal model, press the
TEMP.
key to view wind Chill, Heat Index, Dew
Point Temperature. Press the
TEMP.
key for 5 second, will register new
transmitter.
Note: every 60 second the unit will measure indoor temperature, indoor
humidity and pressure. If temperature is to lower than minimum range, will
display --.-, if it is higher than highest range, will display --.-.
6.4.7
Wind speed
- Press the
SET
key 14th to select wind speed unit ( km/h, mph, knots, m/s,
bft; default: km/h ).
- In normal mode, press and release the
WIND/+
key to view the wind, gust
and wind direction.
6.4.8
Rain
- Press the
SET
key 15th to select rainfall unit ( in or mm; default: mm).
- In normal mode, press and release the RAIN key to view rain of rate,
event, day, week, month and total.
- Press the
RAIN
key for 2 seconds to reset current display rain.
*Rainfall Readings
•
Rain rate:
it forecast the rain per hour base on the recently 10 minute’s
rainfall. For example: the rainfall of recent 10 minutes is 12mm, the
rain/hour is 12mm*6=72mm/h.
•
Rain event: It start to record the rain event value form the rain falls, the
rain event is over and value reset to 0 if last 24 hour rainfall less 10mm
and the last 1 hour no rainfall.
•
Day: 24 hr period from 0:00 - 24:00.
•
Week: defined by calendar week i.e. Sunday
– Saturday.
•
Month: defined by calendar Month i.e. January 1 - January 31.
•
Total: running total since station was powered up
