20
2)
When power on, press
TEMP.
key to skip receive RF signal.
3)
The setting procedure can be exited at any time by either pressing the
LIGHT /SNOOZE
key or waiting for the 30-second time-out to take
effect.
6.4 Set mode
The Set Mode allows you to change date, time, units of measure and other
important functions, as referenced in Figure 16.
To enter the Set Mode, press and hold the
SET
key for two seconds (
SET
+
2 seconds). To advance each command, press (do not hold) the
SET
key.
Command
Function
Description
Settings
SET + 2
seconds
BEEP
Turns on or off the
beep with each
keystroke
Press
WIND/+
or
PRSSURE/-
to toggle OFF and ON
SET
RST
Reset max/min daily
at 12:00am (on) or
manually (off)
Press
WIND/+
or
PRSSURE/-
to toggle OFF and ON
SET
24H
12/24 Hour Format
Press
WIND/+
or
PRSSURE/-
to toggle between 12 hour
(12h) and 24 hour (24h)
format
SET
HR
Hour of Day
Press
WIND/+
to increase.
PRSSURE/-
to decrease
SET
MIN
Minute of Day
Press
WIND/+
to increase.
PRSSURE/-
to decrease
SET
M-D
Month Day Format
Press
WIND/+
or
PRSSURE/-
to toggle between M-D
(month/day) format and D-M
(day/month) format
SET
Y
Year
Press
WIND/+
to increase
and
PRSSURE/-
to decrease
