AMT Datasouth AMT ACCEL-5350, Руководство пользователя

Страница: 90 / 255

User's Guide
4-28 Control Panel
Using Page Setup Parameters
The next section of the Setup menu is page setup. Page setup param-
eters let you specify page size and margins.
Set Form Length
LENG lets you specify the length of the form you are using in 1/6-inch
increments. This setting is very important since it controls continuous-
forms feeding.
You can select a number from 0 to 182 . To determine the correct
number to use for your form, multiply the length of the form in inches by
6. For example, if your form is 11 inches long (11 inches × 6 = 66), you
should select
66 . When you set form length, the printer sets the top-of-
form at the current line and clears the top and bottom margins.
If you set LENG to 0 , the printer does not keep track of lines per page.
When using single sheets, a form feed control code ejects the page;
when using pin-feed paper, a form feed control code performs a carriage
return only.
Set Maximum Print Width
WIDTH lets you specify the maximum print width. If the printer re-
ceives a line that exceeds the maximum print width, the excess prints on
the next line. You can specify
8, 13.6 or 16 inches. When you select
16 , be sure to load paper so that it aligns with the blue line ( ) on the
paper scale.
) Note: When 16-inch wide printing is selected, printing is unidirectional
and slower than normal. Also, draft-quality printing is unavailable. If you
select draft-quality printing, the printer will use memo-quality.
26) LENG: 66/6"
27) WIDTH: 13.6
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
User's Guide
4-28 Control Panel
Using Page Setup Parameters
The next section of the Setup menu is page setup. Page setup param-
eters let you specify page size and margins.
Set Form Length
LENG lets you specify the length of the form you are using in 1/6-inch
increments. This setting is very important since it controls continuous-
forms feeding.
You can select a number from 0 to 182 . To determine the correct
number to use for your form, multiply the length of the form in inches by
6. For example, if your form is 11 inches long (11 inches × 6 = 66), you
should select
66 . When you set form length, the printer sets the top-of-
form at the current line and clears the top and bottom margins.
If you set LENG to 0 , the printer does not keep track of lines per page.
When using single sheets, a form feed control code ejects the page;
when using pin-feed paper, a form feed control code performs a carriage
return only.
Set Maximum Print Width
WIDTH lets you specify the maximum print width. If the printer re-
ceives a line that exceeds the maximum print width, the excess prints on
the next line. You can specify
8, 13.6 or 16 inches. When you select
16 , be sure to load paper so that it aligns with the blue line ( ) on the
paper scale.
) Note: When 16-inch wide printing is selected, printing is unidirectional
and slower than normal. Also, draft-quality printing is unavailable. If you
select draft-quality printing, the printer will use memo-quality.
26) LENG: 66/6"
27) WIDTH: 13.6
ABCDEFGH
ABCDEFGH
ABCDEFGH
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMN
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ
ABCDEFGHIJKLMNOPQ