AMS Neve 88D, Руководство пользователя

Страница: 77 / 85

AMS Neve Health and Safety Warnings Issue 4
Health and Safety Warnings
Caution
THESE SERVICING/INSTALLATION INSTRUCTIONS ARE FOR USE BY QUALIFIED
PERSONNEL ONLY. TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE
COVERS OR BACKS OF UNITS, DO NOT PERFORM ANY SERVICING OTHER THAN THAT
CONTAINED IN THE USER (OPERATING) MANUALS UNLESS YOU ARE QUALIFIED TO DO
SO. REFER ALL SERVICING TO QUALIFIED SERVICE PERSONNEL.
• • • •
Only suitably trained personnel should service this equipment.
• • • •
There are no user serviceable parts enclosed.
• • • •
Please read and take note of all warning and informative labels.
• • • •
This equipment must be isolated from the mains by removing the incoming IEC mains connector before starting any servicing operation.
•
• •
•
Ensure that mains outlet sockets of the facility are easily identifiable.
•
• •
•
All installation wiring must comply with your national wiring regulations.
Explanation of Warning Symbols
The lightning flash with arrow head symbol within an equilateral triangle is intended to alert the user to the presence of dangerous
voltages and energy levels within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock or
injury.
The exclamation mark within an equilateral triangle and book symbol are intended to prompt the user to refer to important
operating or maintenance (servicing) instructions in the documentation supplied with the product.
Earthing, Power Supplies and Fuse Ratings
This equipment must be EARTHED.
Connection should only be made via a suitable connector where the earth ground has been verified. If the ground connection is not present the whole of
the equipment could present a potential electric shock hazard.
In addition to the power cord earth, it is essential to use the separate earth terminal on the equipment where provided.
Information on the mains current and voltages ratings for this equipment is located on the mains rating plate near the IEC mains inlet.
Fuses should only be replaced with ones of the same type and rating as that indicated on the ratings plate.
Refer to the product’s installation manual for further details.
System Interconnections
All system interconnections to this equipment fall within the SELV limits as defined by EN60950.
Environmental Considerations
Temperature Range:
Operating 0°C to +30°C, in the immediate environment
Non-operating -20°C to +60°C.
Relative humidity:
Operating 25% to 80% non condensing.
Non-operating 0% to 90% non condensing.
Should condensation have occurred during shipping it is essential that the units are given time to adjust to the ambient temperature to allow the
condensation to dissipate before power is applied.
Altitude:
Operating Up to 2,000 metres
Non-operating 15,000 metres.
Ensure that the equipment is securely mounted in a rack or on a secure level surface before operating. Additional supports are recommended for rack
mounted equipment over 3U high.
Operate only in a clean, dry and pollutant-free environment.
Do not operate in an explosive atmosphere.
Do not allow any liquid or solid objects to enter the equipment. Should this accidentally occur then immediately switch off the unit and contact your
service agent.
Cooling
Ensure adequate space for cooling is provided - this will also enhance the life and reliability of the equipment.
At higher altitudes cooling may have to be increased.
Do not allow ventilation slots to be blocked.
Regularly inspect, and if necessary, clean air filters on the rack units.
Do not leave the equipment powered up with the dust cover fitted (where provided).
Cooling methods:
Where convection cooling is used (for example the console with no air filters) ensure free air flow by allowing a gap of at least 75mm all around the
equipment. If in doubt contact AMS Neve Customer Support Department for advice.
The rack mounted equipment uses forced air cooling with air filters.
Cleaning
For cleaning the front panels of the equipment we recommend anti-static screen cleaner sprayed onto a soft cloth to dampen it only.
Warning
Exposure to high sound pressure levels for extended periods of time can permanently damage your hearing.
WARNING
DISCONNECT MAINS LEAD
TO ISOLATE UNIT.
NO USER SERVICEABLE
PARTS INSIDE.
HAZARDOUS VOLTAGES INSIDE.
REFER TO MANUALS