Amron 8225-HP, Инструкция по эксплуатации

Страница: 35 / 82

OPERATING PROCEDURES
31
TO OPERATE AND/OR CHECK OUT SIMULCOM 8.12
1. Attach hat to umbilical.
2. Attach common-cable to AMCOM II, red banana plug to Diver 1 mic, black banana plug to
Diver 1 earphone.
3. Don hat and talk to yourself. If you hear your voice over the earphones, the system is
working correctly.
To revert back to 2-wire, remove black banana plug from earphone jacks (AMCOM II) and plug
into top of mic banana plug (red).
To recap, we now have a system where diver 1’s microphone is connected to Diver 1 microphone
input of the AMCOM II. Diver 1’s earphone is connected to the earphone for diver 1. All features
such as diver push to talk switch and independent volume controls of the AMCOM II remain intact.
Tender uses a headset that is plugged into the tender mic and headset jacks. With the AMCOM II
system you can mix 2-wire/simulcom systems, for example, Diver 1 and 2 could be Simulcom
while Tender can be 2-wire (no headset - use speaker for tender). Or, one diver can be 2-wire and
one can be Simulcom. Just remember if any one person is on two wire you must use the push to
talk (PTT) for that diver to hear or for the tender to talk.
Note: The PTT switch over-rides diver conversations (see operating guide for details).
Other configurations which can be implemented with Simulcom systems:
1. Remote station for equipment operator, or second tender on 2-wire or Simulcom.
2. Several remote stations with any combination of 2-wire or Simulcom.