Amroad IX-6030 Скачать руководство пользователя страница 91

Страница: 91 / 137

E.g. Original called number of

12345678 becomes 678 after

“Retain last”, “3” digit(s).

Discard all

Strip all digits of the original called

number.

IVR List

Associate an IVR menu with incoming calls to this

trunk. This is mandatory unless the trunk is configured

for DID. Leave it blank and the system will

automatically create an IVR for the trunk.

Usergroup

of Privilege

When disabled DID, click a usergroup in the list whose

reachability to other usergroups and trunks will be

used as the privilege of inbound calls from this trunk.



There may not be any appropriate usergroups to

select initially. One can come back later to revise

it, once the expected usergroups are added.

Delay Before/After Answering

Delay in seconds before and after answering a call from

PSTN trunk.

6.1.11ISDN PSTN Trunk

An ISDN PSTN trunk group is a logical group of one or more ISDN subscriber lines connecting to

ISDN ports (RJ45) on IP PBX. Currently only Basic Rate Interface (BRI) ISDN service is supported.

BRI consists of two 64 kb/s B channels and one 16 kb/s D channel for a total of 144 kb/s. This basic

service is intended to meet the needs of most individual users.

The

ISDN PSTN Trunk Management

page allows the administrator to configure ISDN trunks. Select

Trunk

ISDN PSTN Trunk

, and one can add, edit and delete ISDN trunks. Go to

Service

PBX

, and click

Reload

to activate changes.

6.1.11.1 Add an ISDN PSTN Trunk

Click the

Add New

tab.

Enter settings shown in Table 6 -30.

Please refer to 1.42 for details.

Please refer to 1.27 for details.

Содержание IX-6030










































































































































Результаты поиска

Содержание IX-6030

Отзывы:

Бренды по названию

Популярные бренды

Amroad IX-6030, Руководство пользователя

Результаты поиска

Содержание IX-6030

Отзывы:

Бренды по названию

Популярные бренды