Page
14
of
34
American Mine Research
12187 North Scenic Highway
Rocky Gap, VA 24366
Message Type
Addressing
Definition
To a Messenger
Select an address from
contact list
This type will be set when a contact has
been selected from the contact list.
To Mine Net
Mine Net’s address
This type will be set when sending to Mine
Net.
Global Message
Global
When this type is selected the message will
be received by all devices no matter what
their addresses are or their subgroup. There
is no need to select an address.
To All Firefighters
To all members of the
Firefighter group
When this type is selected the message will
be sent to all firefighters, there is no need
to select an address.
To All Rescue/EMT
To all members of the
Rescue/EMT group
When this type is selected the message will
be sent to all Rescue members, there is no
need to select an address.
To All Electricians
To all members of the
Electricians group
When this type is selected the message will
be sent to all Electrician members, there is
no need to select an address.
Emergency Message
Global, to all devices and
surface
When this type of message is selected
every device will receive the message
including Mine Net. There is no need to
select an address.
To All Foremen
To all members of the
Foremen group
When this type is selected the message will
be sent to all Foremen members, there is no
need to select an address.
To All Mechanics
To all members of the
Mechanics group
When this type is selected the message will
be sent to all Mechanic members, there is
no need to select an address.
Table 6. Message Types
To select a message type, use the up/down buttons to move the red arrow, once the arrow is on
the desired message type, press the bottom middle button, “Select”, to select the type.
Select a Contact
See
Section One: How to Use the Contact List
for more detailed information on how to use the
contact list. Find the contact to send to then the messenger will place the information into the
destination field.
