Ampt 31570013, Руководство по установке

Страница: 11 / 22

Chapter 2: Installing the Ampt-CU
Copyright 2014 AMPT, LLC.
11
Internal
Figure 3: Interface panel
Component Description
Ethernet port RJ ‐ 45 connector for Power over Ethernet (PoE) and Ethernet communication.
RS ‐ 485 port Reserved for engineering use
Termination switch Reserved for engineering use.
Reset button Pressing this button forces the Ampt ‐ CU to reboot.
Restore button This button restores the network settings and password back to their factory default
values. See Restoring Factory Defaults on page 19 for more detail.
Power LED This green LED is on continuously when the input voltage is above the minimum
threshold.
Com LED This LED displays boot status.
Fault LED This red LED communicates fault conditions.
Cable locks Route the input power and communication cables through these guides.
Ethernet port
RS ‐ 485 port and
Term switch
Reset button
Restore button
Power LED
Com LED
Fault LED
Cable locks