Amplicomms Watch & Care V130, Руководство пользователя

Страница: 37 / 59

Operation with rechargeable batteries
1. Open the battery compartment on the rear side of the receiver.
2. Insert the battery pack, and connect it with the socket. The connector can
only be fitted one way.
3. Close the battery compartment again.
Mounting/dismounting the belt clip
Prize the latch (see figure) with a suitable tool (such as
a small screwdriver) a little bit away from the chassis
and move the belt clip down simultaneously. To attach
the belt clip slide it into the guide towards the top until
it snaps in.
Optimization of range
Baby unit and parent unit come with
fold-out antennas. If necessary, opti-
mum range can be achieved if both
the Baby unit and Parent unit anten-
nas are extended vertically.
The receiver is powered by a a Lithium-ion battery pack of 3.7 V,
1500 mAh. The rechargeable battery pack can be recharged directly in
the receiver when it is inserted in the charging station. The Power LED
lights up when the receiver is being charged. In the case of a low batte-
ry charge, the Power LED flashes slowly. The battery pack must then be
recharged.
30
G
ERÄTE IN
B
ETRIEB NEHMEN
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)
P
UTTING THE
U
NITS INTO
O
PERATION