Amplicomms Watch & Care V130, Руководство пользователя

Страница: 35 / 59

Putting the Units into Operation
Checking the package contents
The package contains: V130 V132
• Camera unit (transmitter) 1 2
• Monitor unit (receiver) with belt clip 1 1
• Rechargeable battery pack for the receiver 1 1
• Power adapter plug for the transmitter 1 2
• Charger with power adapter plug for the receiver 1 1
• Operating manual 1 1
Connecting and aligning the transmitter
Operating with batteries (not supplied)
Use a small screwdriver to open the transmit-
ter’s battery compartment on the underside.
Insert the batteries, paying attention to correct
polarity. Refer to the diagrams in the battery
compartment. Close the battery compartment
again.
Important: please make sure you’ve read the safety information on
page 42 before you set up your system.
The data transmitted (image and/or sound) are digitally coded.
Attention: Position the transmitter with a minimum distance of 1 m to
other electronic devices, otherwise there is a risk of mutual disturbance.
Point the upper section of the transmitter towards the baby or object
you want to monitor. Check that the baby or object is suitably displayed
on the receiver.
28
P
UTTING THE
U
NITS INTO
O
PERATION
Helpline UK 0844 800 6503
(See page 44 for costs and hours of operation)