TSCAN-750 User Manual | 23
Installation Instructions
• For wall mounting, the TSCAN-750 is provided with a wall mount kit, which includes:
1 Wall Mount Plate
4 Wall Plugs
4 KA 4x25 Screws
4 KM 4x10 Screws
4 Hex Screws
4 Hex Nuts
8 Flat Washers
1 ¼-20 3/8” Phillips Screw
•
For freestanding applications, most standard tripods/stands can be used with the TSCAN-750 by fixing the
backplate to the stand using the existing holes and screws provided.
• Regardless of wall mount or freestanding installation, the TSCAN-750 is for indoor use only.
1. Install stickers on the wall, and make
holes in the wall according to the height
and position of the stickers to install
Box 86.
2. Align the outlet of the hanging board
with the center of Box 86. Punch four
mounting holes on the wall according to
the punching size diagram, and insert
four wall plugs.
3.
Use four KA 4*25 screws to fix the hanging board to the wall.
Connect the cable of the external device to the cable, arrange the
cables, and determine the cable outlet method.
4. Hook the device from top to bottom on the mounting plate, and
make sure that the upper part of the hanging plate is inserted into
the groove on the back of the device.
5. Fix the device and hanging plate from the bottom with a screw.
Box 86 for Wall-Mounted
Installation
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from