TSCAN-750 User Manual | 17
Network Settings
Set up device networking.
Operate Code Setting
Modifying the operation code requires that the device is in the online state.
It can be viewed it in the software / device management of the access control and attendance management platform
to prevent forgetting the operation code.
Parameter Settings
White Light
The white light can be set to normally open / normally closed / auto. When set to automatic, it will automatically
adjust on/off according to whether there is face detection or not.
Voice Broadcast
Control the opening and closing of voice announcements.
Similarity Threshold
The threshold adjustment will affect the pass rate and false detection rate of face recognition.
If the face similarity threshold is set higher, the comparison will be stricter and the pass rate will be relatively reduced.
If the mask recognition threshold is set higher, it may lead to an unrecognizable scan. If the threshold is set lower, the
false detection rate will increase. For example, if the original person is not entered and the threshold is set lower, it
may be identified as another individual in the photo library that is similar to the person.
Mask Detection
When mask detection is enabled, only those wearing masks can pass. If someone is detected not wearing a mask,
an alarm will be issued and they will not be able to pass.
When the liveness detection is enabled, the live detection infrared fill light will be performed after recognition. It can
be set to normally open / normally closed / auto. When set to automatic, it will automatically adjust on/off according
to whether there is face detection. Only pass the liveness detection to enter.
Education Mode
(cont.)
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from