iEP1200 | ETHERNET EMERGENCY PAGING MICROPHONE PANEL
PAGE 9
Device Setup Via Browser
iEP1200 shall require some simple setups, kindly follow the step by step instructions as listed below. The unit shall be connected to
LAN together with iPX5101 Paging Server and iPX5155 Paging Client to form a complete system. The default IP address is
192.168.0.100. Login page shall appear and the default User ID and password are both “admin”.
Device Info:
Once is login to the iEP1200 page the below information is
shown:
1) Firmware version
2) Networking addresses
3) Connection status to Paging Serrver
Network Configuration
Edit iEP1200 IP address, Subnet address and Gateway
address here to suit you networking environment. It is recom-
mended to leave the Data port number unchanged. Click the
“SAVE” button to save your changes.
Paging Configuration
Paging Enabled: Enable this setting all the time.
Auto Connect: We can either turn On the Auto Connect to allow
iEP1200 search and connect to Paging Server automatically or
turn Off the setting and specify the Paging Server IP address
here.
Note: If Paging Server IP address is changed to an unknown
value, turn On the Auto Connect allow iEP1200 auto capture the
server IP address and show up in the device information page.
IPv4 Configuration
IP Address
192.168.0.122
Subnet Address
255.255.255.0
Gateway Address
192.168.0.1
Data Port
3000
Paging Enabled
Auto Connect
Paging
Device Information
Firmware Version
Serial Number
Build Date
Device Name
MAC Address
IP Address
Subnet Mask
Gateway Address
Data Port
Server Name
Server IP
Server Version
Network Information
Paging Server Status
IPX Device
192.168.0.101
2.29
114.106:118:18:6:22
192.168.0.122
255.255.255.0
192.168.0.1
3000
IPX Device
192.168.0.101
2.29
2.10
0000000000000000000
21 Oct 2020
iEP1200
