Parts Identification
PAGE 2
iEP1200 | ETHERNET EMERGENCY PAGING MICROPHONE PANEL
Front View:
Rear View:
1
2
5
3
6
7
8
9
10 11
12
13
14
1. FIRE INDICATOR
2. SIREN SWITCH
4. HANDHELD PAGING MICROPHONE
Pressing the microphone switch shall have priority over other inputs such as Siren, External Message input as well as
normal paging or BGM feeds. To page, just pick up the handset, press the button and start talking. Releasing the switch,
the previous operating mode shall resume.
Press the siren button shall activate the siren. FIRE indicator shall lit and the MIC switch relay contact (7) shall close.
Press the siren switch again will turn Off the siren.
Whenever siren or external activation device is triggered, the FIRE indicator shall flash alongside with siren audio
broadcast. Activate the paging microphone will also turn on the flashing.
4
15 16
3. LED INDICATORS
Power - This blue LED shall light up when iEP1200 is powered up.
Streaming - Blink whenever iEP1200 streaming siren or paging to iPX5155 (Paging Client).
Status - Blink whenever there is a network activity ongoing.
Server - This green LED shall lit when iEP1200 successfully establish a connection with Paging Server (iPX5101).
iEP 1200
amperes
MIC
EMERGENCY / SIREN ACTIVE
SIREN
ETHERNET EMERGENCY PAGING PANEL
STREAMING
POWER
STATUS
SERVER
FIRE
MESSAGE INPUT
MAIN OUTPUT
SIREN
MIC
BALANCE LINE LEVEL
VOLUME
RESET
ETHERNET
-
+
DC 24V
NO
A B
RS485
SIREN
TRIG
MESSAGE
TRIG
RELAY
CONT
iEP 1200
ETHERNET EMERGENCY PAGING PANEL
PRE-AMP INPUT
amperes electronics
Another Quality Product From
MADE IN MALAYSIA
5. 24V INPUT
The unit operates on 24V DC. It is preferred that the unit to be supplied directly from the uninterrupted power source. ie.
power supplies linked to back up batteries.
Note: Do not connect directly to the terminals of back up battery. It shall damage the equipment.
