The sleep timer will work with the light panel, sleep sounds or both. The sleep timer will
turn off the light panel and/or sleep sounds 30 minutes after the sleep timer is activated
(regardless of when the light panel/sleep sounds were turned on). To disable before 30
minutes are up, simply long press the sleep timer button (or turn off the light
panel/sleep sounds manually).
Snooze - Snooze will turn off the light alarm and/or sound alarm for ten minutes. At
which point the light and/or sound alarm will go off again. To activate, quick press the
snooze button . The snooze button will remain illuminated so you know that the
sleep timer is activated. To disable before the ten minutes are up, simply long press the
snooze button. The snooze will remain activated until it is turned off.
Setting an alarm - Quick press the sound alarm button to turn sound alarm on and
off -- the sound alarm icon to the left of the time will illuminate when the sound alarm is
activated. To set the alarm, long press the sound alarm button -- and the clock face will
switch so it is displaying the alarm time. Use +/- to adjust the alarm time... Single press
the alarm icon again to set the alarm time (or wait for 5 seconds)
-- when the alarm sounds, single press the alarm button to turn off the alarm
Setting the Light alarm - Quick press the light alarm button to turn the light alarm
on and off -- the light alarm icon to the left of the time will illuminate when the light
alarm is activated. To set the alarm, long press the sound alarm button -- the alarm
time will be displayed on the clock face. Use +/- to adjust the alarm time. . Hold
or - to adjust time in 30 minute increments or quick press to adjust time by one minute
increments.… Single press the alarm icon again to set the alarm time (or wait for 5
seconds) -- when the light alarm goes off, long press the light button to turn off.
The light alarm button is also used to adjust the display brightness. After long
pressing, all touch button backlights will turn off except for . Press to decrease
brightness and to increase brightness.
Selecting the alarm sound and volume - Long press the button to select the alarm
sound. After long pressing, all touch button backlights will turn off except for
and . Quick press to scroll through alarm sounds. Birds chirping, harp, and a
standard beep are pre-loaded. Use to select the volume of the alarm. After 5
seconds the selection will be saved. When setting the alarm sound, the first sound will be
the current one so the user can "check" to see if it is the one they want.
Long press = Press and hold for two seconds
Quick press = Tap the button once
Powering HyperCube - HyperCube comes with a 60W PD adapter (but you can use
another PD adapter if you choose). Once plugged in, the clock lights will turn on to
medium brightness and HyperCube is ready for use.
Setting the time - To set the time, hold down one of the plus/minus button After
two seconds, all buttons except those two will turn off and you can use the plus and/or
minus button to set the time. Hold or - to adjust time in 30 minute increments or
quick press to adjust time by one minute increments.HyperCube has a small internal
battery and memory so you will only have to set it once (unless you change time zones).
Turning on the light panel - Press and hold the light button for two seconds to turn
the light panel on and off.
Quick press the light button to change brightness (low, medium, high)
Changing the Light Panel Color - Quick press the switch light button to change the
light color between white, yellow, blue, red, green, purple, orange
Using Sleep Sounds - Quick press sleep sounds button to turn sleep sounds on and
off. To select a different sleep sound, long press the sleep sounds button . After long
pressing, all touch button backlights will turn off except for and . Quick press
the sleep sounds button to select another sleep sound between forest, ocean, and rain.
Quick press the plus button to increase volume and quick press the minus button .
When you are happy with your selection simply wait for 5 seconds and the sound will be
set.
Sleep Timer - The sleep timer will turn off both the light panel and the sleep sounds
after 30 minutes. To turn on the sleep timer, quick press the sleep timer button . The
sleep timer button will remain illuminated so you know that the sleep timer is activated.
Clock Face and Light Panel Guide
