Hypercube also has a 10W USB-C output. The input has a triangle facing inward and the
10W output has a triangle pointing outward. You can use this port to charge any device.
HyperCube is designed to be portable and versatile. You can use it in different
configurations depending on your requirements. And, because it folds into a convenient
2” stack, you can take it with you anywhere.
Wired Charging
Configuring HyperCube
Flat - Use this position to easily charge
three wireless charging devices.
Simply unfold each panel and lay
HyperCube on flat surface. Do not
place HyperCube on a wet surface or a
surfaces that have metallic protruding
objects (because of the pogo pin
connection on the underside).
Stack - To convert HyperCube into a
stack, first, fold the three charging
panels (with the circles) into a
three-panel stack. Then, lightly pull
the double hinges on the alarm
panel and light panel and stack them
so all five panels sit perfectly flush on
top of one another.
Cube - Make sure all
the hinges are
pressed fully into
HyperCube (pay
close attention to
the “double hinges”
on the alarm face
and the light panel
face). And set it on
the bottom of all four panels. The
magnets will do the rest. This is also
the position required to use
HyperCube with the PD Power Cube
(see HyperCube Accessories).