This product is meant for use only in conjunction with the appropriate device. Please consult your device packaging to determine
whether this product is compatible with your particular device. Manufacturer is not responsible for any damages to any device
incurred through the use of this product. Manufacturer shall not in any way be liable to you or to any third party for any damages you
or any third party may suffer as a result of use, intended or unintended, or misuse of this product in conjunction with any device or
accessory other than the appropriate device for which this product is designed. Manufacturer will not be responsible for any
damages you or any third party may suffer as a result of misuse of this product as outlined above. Purchaser agrees to defend,
indemnify, and hold Manufacturer harmless for any claims or damages arising from unintended use or misuse, including use with
an unintended device.
Read all instructions and warnings prior to using this product. Improper use of this product may result in product damage, excess
heat, toxic fumes, fire or explosion, for which damages you (“Purchaser”), and not Ampere (“Manufacturer”) are responsible.
Do not store/use the device in high-temperature environment, including heat caused by intense sunlight or other forms of heat.
Do not use device in small, confined or sealed spaces (e.g. under blankets, in boxes, etc.).
Do not disassemble this device or attempt to re-purpose or modify it in any manner.
Use with only certified Type-C PD adapters.
HyperCube is designed for personal use only. It is not suitable for commercial applications.
Do not place the backside pogo pin receivers on any protruding metallic material that could complete the circuit (except for
recommended Ampere products).
Remove all foreign metal objects from your device before using on HyperCube. Do not attempt to replace any part of this device.
If this device is used by a minor, it is the sole responsibility of the purchasing adult to provide supervision, instructions, and warnings.
The purchaser agrees to hold the Manufacturer harmless for any claims/damages resulting from misuse by a minor.
Products have undergone rigorous quality assurance inspections. If the device is excessively hot, is emitting odor, is deformed, or is
experiencing or demonstrating an abnormal phenomenon, immediately stop all product use and contact Manufacturer.
Warnings
Legal
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:--
Reorient or relocate the receiving antenna.-- Increase the separation between the equipment and receiver.-- Connect the equipment
into an outlet on a circuit different from that to which the receiver is connected.-- Consult the dealer or an experienced radio/TV
technician for help.This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:(1) This
device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may
cause undesired operation.
FCC Statement
· Keep your HyperCube dry and away from moisture.
· Clean HyperCube with a soft cloth and only enough water to make it damp. Do not use any harsh chemical cleaners or soaps.
· Fold into “stack” form when transporting. We recommend using HyperCube with the Ampere Travel Case for extra protection.
Taking care of your HyperCube
HyperCube is uniquely designed to work with an ecosystem of accessories that amp up
your experience.
60W PD Adapter that comes with HyperCube is fully certified and, in addition to
powering HyperCube, it can also be used to power the PD Power Cube, Speaker Base,
External LED Light Panel and even most laptops.
PD Power Cube is a 20,800 mAh power bank that connects wirelessly to HyperCube and
the Speaker base via a pogo pin connection. It can wirelessly provide 60W of power to
HyperCube, the Speaker Base or both devices at the same time.
To connect to HyperCube to the PD Power Cube, make sure the Ampere Logo on PD
Power Cube and the alarm face on the HyperCube are facing the same direction and the
HyperCube is in the Cube position. Then, simply place the HyperCube on top of the PD
Power Cube and the pogo pin connectors will automatically align and HyperCube will
turn on.
To connect the PD Power Cube to the Speaker Sase, simply align the corners of the PD
Power Cube with the corners of the Speaker Base cavity (short with short and long with
long). The pogo pin receivers on the PD Power Cube will automatically align with the
pogo pin connectors on the speaker base and the Speaker Base will turn on.
Speaker Base amps up the volume for sleep sounds, alarms, and acts as a Bluetooth
speaker for pairing with a phone or other device.
To connect HyperCube to the Speaker Base, align the alarm panel with the buttons on
the Speaker Base and the connection points on the Speaker Base and HyperCube will
align. This will automatically pair HyperCube to the Speaker Base for sleep sounds and
alarms. This also powers HyperCube. If the PD Power Cube is installed, it will be charged
by the Speaker Base when the Speaker Base is plugged in. When it is not plugged in, the
PD Power Cube will power the Speaker Base and/or HyperCube.
External LED Light Panel can be placed anywhere if you want to add more light than
the built-in panel. Place the lights in the hallway, under your bed, in the bathroom,
anywhere (up to 15M away). To turn them on, simply tap the LED Light Panel on
HyperCube to remotely turn them on.
HyperCube automatically pairs and can pair to multiple External LED Light Panels, so
there is no set up required.
HyperCube Accessories
