COGNEX
®
Multi-Battery Charger
Multi-Battery Charger
is an accessory to the
DataMan 8000/9000 reader family. With this
charger, you can simultaneously charge up to four
NP-100 Li-ion batteries
*
used in wireless handheld
readers.
•
Four independent
charging paths that can
operate separately or
simultaneously
•
Automatic connection
detection for empty
batteries
•
Automatic charging
cycle starts without
user interaction
Quick Start Guide
Specifications, Compliance
and Certification Information
Dimensions
Regulator
Specification
USA
FCC Part 15, Subpart B, Class B, ETL
Canada
Industry Canada ICES-003, Class B, ETL
European
Community
CE, EN55022 Class B
Australia/NZ C-TICK AS/NZS CISPR 22/ EN 55022 for Class B
Equipment
Japan/VCCI
J 55022, Class B
Korea
KCC
C-Tick
European
Compliance
WEEE
RoHS
Compliant
þ
16 cm
9 cm
6 cm
12 cm
8 cm
9 cm
Mounting keyholes
Rubber feet to prevent slipping
M3 threaded inserts
24V Screw Lock
connector
24V Jack connector
Specifications
Weight
180 g (without batteries)
Operating
Temperature
0°C – 40°C (32°F – 104°F)
Storage
Temperature
-40°C – 60°C (-40°F – 140°F)
Maximum
Humidity
95% (non-condensing)
IP Rating
IP40
Vibration
Tolerance
0.2’’ (5.1mm) p-p from 5Hz to 22Hz
acceleration of 5g from 22Hz to 300Hz
Drop
Tolerance
<4 drops from 1 meter at 25°C
(device may lose contact with batteries during
drop/vibration)
Supported
Batteries
NP-100 2200mAH
NP-100 3070mAH
Power
input
•
THT style 1.3/3.5mm DC Jack
•
5 mm pitch Terminal Block
Header - recommended wire
diameter is 14-18 AWG
requirements 24VDC, max 1.0 A
consumption up to 24W
•
Very robust industrial construction
•
Dust-protected housing
•
Resistant against vibration,drop, and
corrosive oil
* batteries not included
•
Maximum charging time:
3 hours
for
NP-100 2200mAh
batteries
Immunity standards
EN55024 ITE
Features:
12 cm
2 cm
3.9 cm
When mounting the
battery charger,
leave at least 15 cm
above the unit to
allow batteries to be
inserted and removed.
Battery temperature monitoring
JEITA requirements
4 hours
for
NP-100 3070mAh
batteries
