AMPEON AMP-Series
http://www.ampeon.cn
15
necessary to adjust.
If you need to calibrate the time, you can push
TIME SET
key to enter the time
setting page. Then push the key in turn to switch among the year, month, date, hour,
minute. The adjusted data is in the twinkling status, through pushing the
△
key, we
can change the value of the data. After finishing the setting of the time, push
TIME
SET
key to return to the main page and automatically save the time after the change.
In the time setting page, push
ESC/DELETE
key to return to the main page, but
you can not save the change.
In the time setting page, if there was no more new operation within 4 minutes, it
would return to the main page without saving anything.
▲C
aution
！
While changing the time, you should operate patiently, please confirm carefully
after saving the changing to prevent the error.
1.2 Metal diverting unit APU-02
Figure 14: Diagram of APU-02 panel
a. Use of counting function
COUNT/CLR
a) The data displayed in LED is the times of the metal diverter’s action. If you
want to restart the counting, you can push
COUNT/CLR
key. After the count
reaches 999, the counter will automatically reset and restart the counting.
b) Users can understand the times of metal detecting machine’s action and judge
the rate of metal inclusion in the raw material. And we can also compare it with the
calculating value to check the dropped metal substances.
b. Parameter setting
a)
DATE SET
key is used to transform among the following 5 cycling mode:
