The tube allows the material to
flow through.
This is the On/Off switch.
Typically you’re going to run
between 3-5. The higher you
turn it up the higher the pres-
sure is. The lower you turn it the
lower the pressure.
The recirculation controls are the
two black switches on the top
below the two round pressure
gauges.
The pressure gauges show the
pressure in your spray line.
The Pressure line is where the red
caps on the back where the
hoses get connected.
(The B-Side is shown here.)
This right side of the pump for
the B-Side.
There is a screen here to filter
out any foreign materials before
it goes into your pump.
The A-Side has the same parts
as the B-Side. These are the
valves to turn on and off.
This is a picture of air dryers.
Patriot Jr. Detailed Overview
The silver tubes are the air vents
for your drums (even though it is
shown in black here).
Both gauges are at the 12:00
position for spraying.
800.620.7928
PAGE 17
WWW.PATRIOTJR.COM
FLEECEBACK & INSULATION MOBILE ADHESIVE DISPENSING CART
Содержание P-55
Страница 1: ......
