Ampcontrol IPM V2, Руководство пользователя

Страница: 57 / 83

Ampcontrol Pty Ltd
– ABN 28 000 915 542
IPM V2 USER MANUAL
IPM2B003 Revision 15
– MAY/18
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version Page 57 of 83
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
Event Description
one outgoing phase when the main contactor was
closed
Ires.trip Residual E/L Trip condition
Tmem Loss The thermal memory data has been corrupted
T-mem Rst Thermal memory has been manually reset to zero
Mem.ERROR
Records that the relay‟s non-volatile parameter
memory has been corrupted
µ- P reset Internal microprocessor reset
RTM mem. E
Records that the Remote
Termination Module‟s
non-volatile memory has been corrupted or Remote
Termination Module has gone off line while the
outlet is running.
Feeder On Records RTM machine code and number when
main contactor is closed (proceeded by MCR
closed). This log only appears when in RTM mode.
RTM Off L Indicates a loss of communications with the RTM.
Meg Ω Trp
Insulation Test failed
IT: -- . -M
Ω
Records the result of the Insulation Test
Insul.Alm Result of Insulation Test is equal to or less than the
alarm level
o/l alarm Thermal accumulator has exceeded the selected
threshold
L-cur alm
Phase current has dropped below the selected
threshold
H-cur.alm Phase current has exceeded the selected threshold
e/l alarm Earth leakage current exceeded the selected
threshold
RTM Stop
In any of the remote start modes; the event log will
record when the IPM is stopped via the remote
digital input.
12.10 Time and Date
Clock Setup
We 26/07 14:58:21
If there is a need to adjust the real time clock, carry out the following procedure:

Using the d
isplay‟s keys select the time and date information page (Level 4, Screen 5) to display
the Day, Month, Year, Hours and Minutes.

Press the ENTER
key. A “v” will appear in the top line above the minute section. This indicates
the number to be changed.

Use the left and right arrow keys to move the “v” to the desired position.

Press the ENTER
key. The “v” now changes to a “?” The right arrow key is used to increment the
allowable values, once the desired value is obtained, press the ENTER
key again. The “?”
returns to a “v”.