IntesisBox
®
Modbus Server – Mitsubishi Heavy Industries AC
User’s Manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
20 / 26
In order to force a specific value to a signal, double-click its row in the table. This will
display a dialog in which the desired value can be entered (see Figure 4.7). Changing its
value in this way, will make:
The content of the corresponding Modbus address will be changed to this value.
If the signal is write-enabled, it will trigger a suitable command to Mitsubishi Heavy
Industries AC system.
Figure 4.7
Signal value change window
Files
4.5
LinkBoxMB saves the integration configuration in the following files inside the project folder:
PROJECT.INI
INI file containing general information related to the project
MHI.INI
INI file containing information related with the values configured
through the “Connection” tab in IntesisBox
®
configuration
MHI.LBOX
Binary file created from the information in the files described
above. This is the file downloaded to the IntesisBox
®
.
Table 4.1
LinkBoxMB generated files during Project creation
It is strongly recommended to back up the project folder containing these files in external
media, once the installation process is finished. This way you will be able to do future
configuration changes in case of reinstallation of LinkBoxMB due, for example, to a failure of
the hard disk in the PC where LinkBoxMB was installed.
The configuration cannot be uploaded from the gateway to LinkBoxMB, it can only
be downloaded.
AMP Air Conditioning
www.ampair.co.uk | [email protected]
