IntesisBox
®
Modbus Server – Mitsubishi Heavy Industries AC
User’s Manual r1.0 eng
© Intesis Software S.L. - All rights reserved
This information is subject to change without notice
IntesisBox
®
is a registered trademark of Intesis Software SL
URL
Email
tel
http://www.intesis.com
[email protected]
+34 938047134
19 / 26
b.- If
NO
is selected, remember that the binary file with the project needs to
be generated before the IntesisBox
®
starts to work as expected.
3.- Once in the configuration window again, click on
exit
. Configuration file is ready
to be sent to the IntesisBox
®
device.
4.- Press the
Send File
button to send the binary file to the IntesisBox
®
device. The
process of file transmission can be monitored in the IntesisBox
®
Communication
Console window. IntesisBox will reboot automatically once the new configuration is
loaded.
After any configuration change, do not forget to send the configuration file
to the IntesisBox® using button Send File.
Signals viewer
4.4
Once the gateway is running with the correct configuration, to supervise the status of the
configured signals, press the
Signals
button on the
menu
bar (see Figure 4.1). The Signals
Viewer window will open (see Figure 4.6).
This window shows all signals active within the gateway with its main configuration
parameters and its real time value
1
in the
Value
column.
Figure 4.6
LinkBoxMB Signals Viewer
The signals viewer can be used even though only one system is connected to the
IntesisBox
®
, Modbus
or Mitsubishi Heavy Industries AC. Therefore, it becomes convenient
for supervision and testing the system.
1
In case you connect to the IntesisBox
®
when it’s been running for a certain time, you should press the
Refresh
button to get updated values. After pressing
Refresh
, all signal values will keep continuously updated until the
connection is closed.
AMP Air Conditioning
www.ampair.co.uk | [email protected]
