Ampac EvacU Elite, Инструкция по установке и эксплуатации

Страница: 125 / 130

Page 118
EVACU ELITE INSTALLATION, COMMISSIONING AND USER MANUAL
10.9 Quad radial EIS line card
Parameter Detail
No. of handset interfaces 4
No. of MCPs per handset 2
Handset line cabling 2 core 1.5mm 2 max
Handset line cabling 1 km (max)
Handset line impedance 600 Ω
Handset line bandwidth 3k4Hz
No. of rack slots 1
Current consumption 0.136 amps (quiescent), 0.305 amps (active)
10.10 Dual loop EIS line card
Parameter Detail
No. of loop interfaces 2
Handsets per loop 20
MCPs per handset 1
Loop length 1 km (max)
Signalling Proprietary modulated digital over power
Loop cabling 2 core twisted 1.5mm
2
(Unshielded Twisted Pair)
Max distance between
handsets
500m
No. of racks slots 1
Current consumption 0.050 amps (quiescent – no phones connected), 0.360 amps (20 phones
connected to 1 loop), 0.650 amps (40 phones - 20 phones connected to 2
loops)
10.11 Network interface card
Parameter Detail
BGM 2 channels, 10k Ω impedance, max input +4 dBu
Network interface wiring Multi-mode fibre, single mode fibre, 2 core cable (VDSL) or Cat 5/6
Audio channels 8 audio streams 92 x BGM, 6 x WIP handsets, 2 x paging)
No. of racks slots 1
Current consumption 0.045 amps (RJ45)
0.195 amps (OEM3087/3088 fitted)
0.087 amps (2xOEM3097, 2xOEM3094, OEM3095/3096 fitted))
Networking (node to node) CAT 5/6 cable using standard ethernet RJ45 – 100m
CAT 5/6 cable or UTP using SFP OEM3087/3088 – 1000m
Multi mode dual core fibre using SFP OEM3097 – 500m See Note 1*
Single mode single core fibre using OEM3095/3096 – 10000m
Single mode dual core fibre using OEM3094 – 10000m See Note 1*
Note 1 * items OEM 3094 and OEM 3097 are not covered by LPCB certification at this point in time.