[email protected] • 813.978.3900
–5–
Remove Glare Guard
4
Install R7S Bulb
5
Loosen the set screws and remove the glare guard from the fixture body.
Fixture Body
Set Screw
Glare Guard
Insert the R7S bulb with the
correct wattage and type
marked on the fixture label and
push into place.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
Bulb Base
R7S Bulb
R7S Bulb
Rotate
Before installing the glare guard back onto the fixture, adjust the R7S
bulb.
Rotate the bulb inside it’s socket towards the back of the fixture to
decrease the light output. To return to the normal lumen output, rotate
the bulb towards the lens.