©Copyright AMKUS Rescue Systems 2020-2021
9
LAP-012 October 7, 2021 Rev02
4.2 SCREEN IDENTIFICATION
Figure 4.2
Main Screen
The main touch screen is used to operate the unit.
Using the touchscreen or the button switches below,
the user may:
• Start the system
• Operate either pump motor
• Open or close the pump valves
See Section 9.0 on page 17 for detailed operating
instructions.
I/O Screen
The I/O screen shows the states of each input and
output in real time. This screen is most helpful for
troubleshooting a system.
Runtime Screen
The runtime screen shows total hours of use on each
motor.