Amity Technology 2720, Руководство по эксплуатации

Страница: 82 / 95

13 - 13
- Axle Height Setpoint: The axle setpoint is the rear axle cylinder height that the system will target
when in “ AUTO ” mode. This number will be the average stroke distance between the left and right
cylinders. When “ AUTO ” mode is entered, the rear cylinders will move to meet the selected setpoint.
To level the harvester the cylinders will move up and down while maintaining an average stroke dis-
tance of the setpoint. This means that if a difference of 2 inches is needed between the two cylinders
to make the machine level, one cylinder will move up 1 inch from the setpoint and the other will
move down 1 inch from the setpoint. There are four setpoints to chose from. (2 inches, 4 inches, 6
inches, and 8 inches). Select the current setting to make a list pop up for selecting a different setpoint.
Figure 13 - 33: Axle Setpoint Pop Up List
- Sound Notifications: If your VT is compatible with sound, there is the option of having the screen
beep when entering and exiting “ AUTO ” mode. When entering “ AUTO ” mode, the screen will produce
one long beep. When exiting “ AUTO ” mode, the screen will produce two shorter beeps. While on the
settings screen, a softkey will appear that allows you to turn the sound on or off. The softkey itself will
change in appearance to signify if the sound is on or off.
Figure 13 - 34: Sound On Softkey