Amity Technology 2720, Руководство по эксплуатации

Страница: 81 / 95

13 - 12
- Depth Sensitivity: The depth sensitivity controls the responsiveness of the machine when in “ AUTO ”
mode. The higher the number, the faster the system will react to the wand readings. The sensitivity
can be set in the range from 1
- 10 in increments of 0.5. To change the valve, use the plus and minus
icons on the sides of the current setting. By directly selecting the setting number, a pop - up keypad will
appear and a number can be typed in manually.
Note: Oil temperature will affect the responsiveness of the system. It is recommend that the system
only be used once the tractor and its oil has warmed up to normal operating temperature to reduce
any fluctuation of the system
’ s sensitivity.
Figure 13 - 29: Sensitivity Setting and Adjustment
- Target Depth: Target depth is the depth that the machine will try to achieve while in “ AUTO ” mode.
The depth of the machine is determined by the wands in the front of the machine. To change the
depth, use the plus and minus buttons on the sides of the current setting. The plus and minus buttons
will change the target depth in increments of 0.2. By directly selecting the setting number, a pop
- up
keypad will appear and a number can be typed in manually.
Figure 13 - 31: Target Depth Setting and Adjustment
Figure 13 - 32: Pop Up Keypad
Figure 13 - 30: Pop - Up KeyPad
In order for the joystick to be used, it must be activated first. To active the joystick, there is a softkey
to toggle between activating and deactivating the joystick (Figure 13
- 26). When the joystick is active,
the icon on the screen will be colored green (Figure 13 - 27). When the joystick is inactive, the icon will
be gray (Figure 13 - 28). Changing the configuration will cause the joystick to become inactive until re-
activated.
Figure 13 - 26: Joystick Toggle Softkey Figure 13 - 27: Joystick Inactive Icon Figure 13 - 28: Joystick active Icon