Amit IWP87DAM-07151, Руководство пользователя

Страница: 86 / 320

PoE AP Router
86
Advanced Configuration
Item Value setting Description
Regulatory Domain
The default setting is
according to where
the product sale to
It limits the available radio channel of this device.
The permissible channels depend on the Regulatory Domain .
Beacon Interval 100
It shows the time interval between each beacon packet broadcasted.
The beacon packet contains SSID , Channel ID and Security setting .
DTIM Interval 3
A DTIM (Delivery Traffic Indication Message) is a countdown informing
clients of the next window for listening to broadcast message. When the
device has buffered broadcast message for associated client, it sends the next
DTIM with a DTIM value.
RTS Threshold 2347
RTS (Request to send) Threshold means when the packet size is over the
setting value, then active RTS technique.
RTS/CTS is a collision avoidance technique.
It means RTS never activated when the threshold is set to 2347 .
Fragmentation 2346
Wireless frames can be divided into smaller units (fragments) to improve
performance in the presence of RF interference at the limits of RF coverage.
WMM
The box is checked by
default
WMM (Wi ‐ Fi Multimedia) can help control latency and jitter when
transmitting multimedia content over a wireless connection.
Short GI
By default 400ns is
selected
Short GI (Guard Interval) is defined to set the sending interval between each
packet. Note that lower Short GI could increase not only the transition rate
but also error rate .
TX Rate
By default Best is
selected
It means the data transition rate . When Best is selected, the device will
choose a proper data rat e according to signal strength .
RF Bandwidth
By default Auto is
selected
The setting of RF bandwidth limits the maximum data rate.
Transmit Power
By default 100% is
selected
Normally the wireless transmitter operates at 100% power. By setting the
transmit power to control the Wi ‐ Fi coverage .
5G Band Steering
The box is unchecked
by default
When the client station associate with 2.4G Wi ‐ Fi, the device will send the
client to 5G Wi ‐ Fi automatically if the client is available on accessing this 5G
Wi ‐ Fi band.
This option is only available on the module that supports 5GHz band.
WIDS
The box is unchecked
by default
The WIDS (Wireless Intrusion Detection System) will analyze all packets and
make a statistic table in WiFi status.
Go to Status > Basic Network > WiFi tab for detailed WIDS status.
Save N/A Click the Save button to save the current configuration.
Undo N/A
Click the Undo button to restore configuration to previous setting before
saving.