Amit IWP87DAM-07151, Руководство пользователя

Страница: 164 / 320

PoE AP Router
164
Port Configuration Setting
Go to Field Communication > Bus & Protocol > Port Configuration tab.
In "Port Configuration" page, there is only one configuration window for the serial port settings. The
"Configuration" window can let you specify serial port parameters including the operation mode being
"Virtual COM", "Modbus" or disabled, the interface being "RS ‐ 232" or "RS ‐ 485", the baud rate, the data bit
length, the stop bit length, the flow control being "RTS/CTS", "DTS/DSR" or "None", and the parity.
Port Configuration Window
Item Value setting Description
Serial Port N/A It displays the serial port ID of the serial port.
The number of serial ports varies from the purchased model.
Operation Mode Disable is set by default It displays the current selected operation mode for the serial interface.
Depending on the purchase model, the available modes can be Virtual COM, or
Modbus.
Interface
RS-232 is set by default
Select RS ‐ 232 or RS ‐ 485 physical interface for connecting to the access device(s)
with the same interface specification.
Baud Rate
19200 is set by default Select the appropriate baud rate for serial device communication.
RS-232: 1200 / 2400 / 4800 / 9600 / 19200 / 38400 / 57600 / 115200
RS-485 can use higher baud rate for 230400 and 460800. It depends on
the cable length and the installed environment. The longer cable, the
lower baud rate for it.
Data Bits
8 is set by default Select 8 or 7 for data bits.
Stop Bits
1 is set by default Select 1 or 2 for stop bits.
Flow Control
None is set by default Select None / RTS, CTS / DTS, DSR for Flow Control in RS-232 mode.
The supporting of Flow Control depends on the purchased model.
Parity
None is set by default Select None / Even / Odd for Parity bit.
Action
N/A
Click Edit button to change the operation mode, or modify the
parameters mentioned above for the serial interface communication.
Save
N/A
Click Save button to save the settings.
Undo
N/A
Click Undo button to cancel the settings.