Amit IWP87DAM-07151, Руководство пользователя

Страница: 29 / 320

PoE AP Router
29
WiFi Uplink
WiFi Uplink WAN Type Configuration
Item Value setting Description
Connect to AP N/A
Display the information of AP for connecting.
You can Click the Scan button and select a AP for the uplink network.
Besides, you can also create uplink profile(s) for ease of connecting to an
available Uplink network. Refer to Basic Network > WiFi > Uplink Profile
tab.
Network Type
1. A Must filled setting
2. NAT Mode is selected
by default.
Select the expected network type for the WiFi Uplink connection. It can be
NAT Mode , Bridge Mode , or NAT Disable .
When NAT Mode is selected, the NAT function is activated on the Wireless
Uplink connection;
When Bridge Mode is selected, the bridge function is activated on the
Wireless Uplink connection; The supporting of bridge mode depends on the
product specification, if the purchased device doesn’t support the bridge
mode, it will be greyed out from selection.
When NAT Disable is selected, the NAT function is deactivated on the
Wireless Uplink connection, and it can function as a router with manually
configured routing setting.
IP Mode
1. A Must filled setting
2. Dynamic IP is selected
by default.
Specify the IP mode for the wireless uplink Interface. It can be Dynamic IP
or Static IP .
When Dynamic IP is selected, the device will request a IP from the Uplink
Network as the IP for the uplink interface ;
When Static IP is selected, you have to manually configure the IP address
settings for the uplink interface. The settings include IP address, subnet
mask, gateway, and primary/secondary DNS.
Fast Roaming 1. An Optional setting Check the Enable box to activate the fast roaming function for the WiFi