Amit IWP87DAM-07151, Руководство пользователя

Страница: 182 / 320

PoE AP Router
182
Specify Modbus TCP Slave device(s)
If there is a Modbus Master device is attached to the serial port of the Modbus Gateway, user has to further
specify the Modbus TCP Slave device(s) to send requests to from the attached Modbus RTU/ASCII Master
device.
When the Add button is applied, a Modbus TCP Slave Configuration screen will appear.
Modbus Remote Slave Configuration
Item Value setting Description
IP
A Must fill setting Enter the IP address of the remote Modbus TCP Slave device.
Port
1. A Must fill setting
2. Range 1 to 65535
Enter the TCP port on which the remote Modbus TCP Slave device listens
(to the TCP client session request).
Value Range : 1 ~ 65535.
ID Range
R ange 1 to 247 Enter the Modbus ID range for the Modbus TCP Slave(s) that will respond
to the Master’s request.
In addition to specify the Slave IP and Port, for accessing those Remote
Modbus RTU Salve(s) located behind another Modbus Gateway, user has to
specify the Modus ID range of the Modbus RTU Slave(s).
Value Range : 1 ~ 247.
Local Serial Port
It is unchecked by default. Select the Serial port(s) from which the Master’s request will be sent to the
Modbus TCP Slave(s). If the check box is grayed out and not available,
ensure that you have Master option selected in the Modbus Serial
Definition sub ‐ screen and save the setting.
Note: The number of Serial Port supported depends on the gateway model
purchased.
Enable
It is unchecked by default. Check the Enable box to enable this rule.
Save
N/A Click the Save button to save the settings.
Undo
N/A Click the Undo button to cancel the changes.