AMIMON Connex LR, Руководство пользователя

Страница: 39 / 56

Key Description
1 Timeout: Determines the length of time (in seconds) between losing communication and applying Fail Safe values onto
the output of the Air Unit.
2 S.BUS Rate: Specifies the data rate of the S.BUS link between the Ground Unit and the Air Unit that controls the Air
Unit’s camera gimbal. By default, the data rate of the S.BUS remote control is 6.3mSec (FASSTest 12CH).
3 Channel Settings: Determines the position of the gimbal following a loss of communication. Each channel can be set to:
• Hold: The most recent value (prior to the communication loss) is maintained.
• Set: A new value is used. Values are configured in % (from -100 to +100).
IMPORTANT: It is recommended to utilize the CONNEX link for gimbal control ONLY and NOT for full
drone control.
To set Fail Safe parameters:
1. Make sure that the computer on which the CONNEX Management application is installed is con-
nected to the Air Unit via a Micro USB cable and is connected to the Internet.
2. Launch the CONNEX Management application by double-clicking its desktop icon.
3. Select the Control Configuration tab.
4. From the Timeout dropdown menu, select the relevant option (1, 2, or 3 seconds).
5. If required, manually set the outgoing S.BUS bit-rate by selecting one of the following S.BUS Rate
modes:
•
Auto: 15m sec: FASSTest 18CH or T-FHSS Mode. The S.BUS rate is received and sampled
from the remote control trainer port. The Air Unit then automatically outputs the same S.BUS
rate.
Connex LR Manual
39