AMIMON Connex LR, Руководство пользователя

Страница: 34 / 56

Key Description
1 Channel Mode: Determines the bandwidth of the wireless link. CONNEX users can select High Quality (40 MHz) or
Stability Boost (20 MHz).
Note: CONNEX mini units supports both modes from firmware version 4.5 and above.
2 Frequency Mode: Determines whether automatic or fixed frequency is used. The options available for fixed frequency
vary according to other options selected (regional settings and Channel Mode).
Note: CONNEX mini units supports Fixed Frequency from firmware version 4.5 and above.
3 Regional Settings: Allows you to set the operating mode of the unit, according to regional regulations. The options are
relevant for European, Chinese, Japanese and Korean regions.
To configure the link:
1. Make sure that the computer on which the CONNEX Management application is installed is con-
nected to the Air Unit via a Micro USB cable.
2. Launch the CONNEX Management application by double-clicking its desktop icon.
3. Select the Link Configuration tab.
4. For CONNEX units , and CONNEX Mini units from Firmware version 4.5 and above,only:
Select the bandwidth channel mode, as follows:
•
Optimized Quality (40 MHz): This is the default option which provides the best quality. This is
the only option that can be used with 1080P60 video resolution.
• Range Boost (20 MHz): Use this mode in harsh RF conditions or for long range operations. This
mode enables higher stability, but supports only lower resolutions on the video link.
5. For CONNEX units , and CONNEX Mini units from Firmware version 4.5 and above:
Connex LR Manual
34