Model
SE578A
Service
Replacing Parts
Parts
1. Console Assembly
Rev.
1
2
3
4
Procedures：
1.
Use Phillips head screw driver to
release three M5x15mm Phillips head
screws and two 3.5x12 m/m Sheet
Metal Screws to take apart front and
rear Mast Covers, as shown in figures
1, 2 and 3.
2.
Use Phillips head screw driver to
release four M5x10mm Phillips head
screws and disconnect Computer cable,
Handle Resistance Wire, Handle
Incline wire and Handpulse Cable to
take Console apart, as shown in figure
4.
3.
Reverse above steps to resume
console. (Be sure not to pinch wires)
4.
Release 3.5x12 Sheet Metal Screws if
opening top and bottom console covers
is necessary. (To be opened by
professionals only)
