15
OPERATION
Switching on the induction hob
When the induction hob is switched off then
all the cooking zones are disconnected and
the indicators are off.
Touching the on/off sensor field (
1
) switches
on the induction hob, and a flashing „
0
” ap
-
pears on the right front sensor field (
3
) for 10
seconds. Now the desired heating power can
be set using the (
+
) sensor field (
5
) and the
(
-
) sensor field (
4
) (
see „setting the heating
power”).
If none of the sensor fields is switched within 10 seconds then the heating
zone switches off.
Switching on the cooking zones
Touch control sensor panel
When the cooking surface is connected to the
electricity mains, the „
-
” symbol should light
up briefly on the indicator (
3
), after which the
induction hob can be switched on.
No objects should be placed on the sensor surfaces (this could cause an error).
Touch sensor surfaces should be always kept clean.
If the induction hob is on (i.e. at least one
cooking zone is on), then the next cooking
zone can be switched on by touching sensor
field (
2
) first to chose the appropriate cooking
zone. When a „
0
” flashes on the indicator, the
desired heating power can be set using the
(
+
) sensor field (
5
) and the (
-
) sensor field (
4
)
(
see „setting the heating power”
)
If none of the sensor fields is touched within 10 seconds then the induction
hob switches off.
3
3
1
5
4
5
4
2
Содержание PB*4VQ247CF
