13
OPERATION
Set and adjust the current time - Power
On mode
When the appliance is plugged into the elec-
trical mains supply, or when power is restored
after power outage, the digital display will
show flashing
0.00
MENU
— select the mode of operation
>
— higher setting sensor
<
— lower setting sensor
— appliance on indicator
— Kitchen timer
— Duration
— End Time
l
Touch and hold down the
MENU
sensor
or
simultaneously touch and hold
<
/
>
until
you hear a beep and the symbol is
shown on the display. The dot under the
symbol will start to flash.
l
Touch
<
/
>
within 7 seconds to set the
current time.
To store the new time setting, wait approxi-
mately 7 seconds after time has been set.
The dot below the
symbol will stop flashing.
You can adjust the time later. To do this touch
<
/
>
simultaneously and adjust the current
time while the dot below the symbol is
flashing.
Note:
The oven can be turned on when you see the
symbol on the display.
Standby mode
In this mode, the current time, minute mind-
er, timed operation or delayed timed opera-
tion status is displayed. Touch
MENU
to cycle
through available menu items. Available
MENU
items:
•
Set Minute Minder
•
Set Duration
•
Set End Time
•
Set OpenUp! (opens the door automati
-
cally)
•
Standby
Electronic programmer
