19
MAINTENANCE AND CLEANING
I. Empty the water container
1.Hold and pull out the water container with two hands.
2.Tilt the water container, pour out the condensed water.
3.Insert the water container.
II. Clean the lint filter
Leave the dryer to cool down
1.Open the machine door.
2.Take out the lint filter, pull upward to take it out.
3.Clean the lint filter; wipe off the scrap threads accumulated on
the lint filter, with your hand or rinse with water and dry thor
-
oughly.
4.Reinstall the lint filter.
NOTE!
1.The lint filter accumulated on the filter will block the air circu
-
lation, which will cause the extension of drying time and energy
use; therefore, the scrap thread filter shall be cleaned after each use.
2.Do disconnect the power cord before cleaning!
3.Do not operate the dryer without the lint filter !
4.Clean the lint filter after each use to prevent lint accumulation inside
the dryer.
Wash air condenser
-Leave the dryer to cool down.
-Residual water may escape, place an absorbent cloth under the
maintenance flap.
1.Unlock the maintenance flap.
2.Completely open maintenace flap.
3.Screw both locking levers towardas each other.
4.Pool out the air condenser.
5.Clean the air condenser completely, drain thoroughly.
6.Clean the seals.
7.Re-insert the air condenser, handle at the button!
8.Unscrew both locking levers.
9.Cloth the maintenance flap until it locks into position.
Please clean the air condenser approx, once every 3 months if fre-
quently used.
Do not damage the air condenser !
1.Clean with water only; do not use hard/sharp-edged objects! Do not
operate the dryer without the air condenser!
2.During drying, water may collect between the window and the seal,
but this does not affect the function of your dryer!