17
TROUBLESHOOTING
Alarm Problem
Alarm Reason Buzzer Alarm
Release
is flashing
Water tank full
or pump error
Check the water tank and
pump.
is flashing
Air flow block
Check the filter and the air
folw
E30
Heater
problem
The Error Code is
flashing on X:XX at
Flash Rate 1.
Meanwhile the
beep is sounded
every 15 minutes.
Check the heater and the
thermostat
E32
Humidity
sensor error
Check the Humidity sensor
and PCB
E33
Temperature
sensor error
Check the front temperature
sensor
E34
Check the rear temprature
sensor
1.Empty the water container after each use, the programme will be paused and the
icon will flash if the water container is full during the drying process. After the container
emptyed, the dryer can be restarted by pushing [Start/Pause] button.
2.Do not drink the condensed water.