Amica 111.3YW, Инструкция по эксплуатации

Страница: 9 / 36

9
Installing the oven

The kitchen area should be dry and aired
and equipped with efficient ventillation.
When installing the oven, easy access to
all control elements should be ensured.

This is a Y–type design built–in oven,
which means that its back wall and one
side wall can be placed next to a high
piece of furniture or a wall. Coating or
veneer used on fitted furniture must be
applied with a heat–resistant adhesive
(100°C). This prevents surface deforma-
tion or detachment of the coating.

Hoods should be installed according to
the manufacturer’s instructions.

Make an opening with the dimensions
given in the diagram for the oven to be
fitted.

Make sure the mains plug is disconnected
and then connect the oven to the mains
supply.

Insert the oven completely into the open-
ing without allowing the four screws in the
places shown in the diagram to fall out.
INSTALLATION