amiad Omega 13.5K, Руководство по установке и эксплуатации

Страница: 32 / 93

OMEGA F ilt ers – Ins tal lati on & Oper atio n Manu al Pag e 2 of 4
Installation Instructions
General
a. General
1. Before beginning the installation process, carefully read the safety instructions chapter of this
document and make sure that all the workers at the installation site are fully aware of and comply
with, these and any other local safety instructions.
2. If possible, prior to installing the filter, thoroughly flush the main line at the connection point in
order to remove large objects that may damage the filter’s internal mechanism.
b. Mechanical installation
1. Locate the filter package near by the location in which the filters will be installed
2. Locate the filter at its intended operational location, level it so that the Inlet, Outlet and flushing
flanges are aligned with the piping.
3. Connect and bolt all filter flanges to equivalent piping flanges.
4. Locate the relevant valves (Isolation, flushing etc.) in their position and orientation.
IMPORTANT!!
It is required to prevent static back pressure or reverse flow through the filter therefore a non-return
valve must be installed at the outlet of the filter.