amiad 2-84, Инструкции по установке, эксплуатации и обслуживанию, Страница: 3 / 18

3 amiad
filtration systems
TECHNICAL SPECIFICATIONS
General
Maximum flow rate 250 m
3
/h 1100 USgpm Consult manufacturer for optimum
flow depending on filtration degree
& water quality.
Min. working pressure 1.5 bar 21 psi or lower if pressure is increased
. for flushing
Max. working pressure 10 bar 150 psi 16 bar = 240 psi upon request
Filter area 4,500 cm
2
700 in
2
Inlet/Outlet diameter 100,150, 200 mm 4", 6", 8" Flange standards as per request.
Filter housing 250 mm 10" Epoxy-coated steel, or other on
request.
Max. working temperature 80
0
C 176
0
F
Weight 100 mm = 150 Kg 4" = 330 lb.
150 mm = 156 Kg 6" = 344 lb.
200 mm = 165 Kg 8" = 364 lb.
Flushing Data
Exhaust valve 50 mm 2"
Flushing cycle time 20 seconds 20 seconds
Wasted water per cycle 83 liter 22 gallon at 2 bar = 30 psi
Minimum flow for flushing 15 m
3
/h 66 USgpm at 2 bar = 30 psi
Control and Electricity
Control voltage 24V AC (12V or 24V DC upon request)
Electric motor 1/3 HP 50 / 60 Hz, 35 / 42 Gear output R.P.M.
Rated operation Voltage 3 phase 220 / 380 / 440 V, 50 / 60 Hz
Single phase 110 / 220 V, 50 / 60 Hz
DC 12V or 24V (upon request)
Current consumption 0.8 Amp. (with 3 phase 380 / 440 V)
Construction Materials
Filter Housing and Lid Epoxy-coated carbon steel 37-2 (Stainless Steel 316 available on request).
Screens Stainless Steel 316
Cleaning mechanism Stainless Steel 316, POM
Exhaust valve Epoxy-coated cast iron, Natural Rubber
Seals Synthetic Rubber, Teflon
Control Aluminum, Brass, Stainless Steel, PVC
Standard Filtration Degrees
Stainless Steel Weavewire Screen
micron 500 300 200 130 100 80 50 25 10
mm 0.5 0.3 0.2 0.13 0.1 0.08 0.05 0.02 0.01
Mesh 30 50 75 120 155 200 300 450 600