COPYRIGHT © 2010 AMI ENTERTAINMENT NETWORK, INC.
PM0773-01 MEGATOUCH FIREFLY OWNER’S MANUAL
24
Diagnostics Menu
FIGURE 12 - DIAGNOSTICS MENU
Video Test
Touch the screen to cycle through a series of video test screens.
I/O Test
This is used to confirm that the accelerometer is functioning. When
you tilt an undocked FireFly, the numbers on the screen should
change.
Touchscreen
Calibration
Follow the on-screen instructions to calibrate the touchscreen.
NOTE
: If the calibration is off to the point where this can’t be
completed, you’ll need to use a USB pen with a
dip1
program on it.
See “DIP Switch Functionality” in this manual for more details.
Touchscreen
Test
Allows you to check the touchscreen calibration accuracy. The
crosshairs should follow your finger exactly when you move it across
the screen.
Checksum Test
Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted
will be shown whenever the game encounters an error. With STOP
ON ERROR? set to NO, a list of corrupted files will be displayed
when the test is complete. If errors are detected, the software on the
drive may need to be reloaded. If this does not solve the problem,
the drive may require replacement. This test could take up to 2
hours.
System Info
Gives details about the following:
•
platform type
•
processor type and speed
•
motherboard type
•
amount of memory
•
wired network
•
sound chip type
•
hardware serial number
•
video chip type
•
touchscreen manufacturer
•
hard drive manufacturer/size
•
modem identification
(N/A)
•
fan speed (N/A)
•
status
•
PSOC version
•
I/O board processor
•
monitor
•
wireless network
•
dock serial number
•
battery
Verify
Databases
Only use on the advice of Technical Service. An
Update from
Server
must be performed prior to verifying databases.
View System
Log
Displays a log of all operations performed by the game since the log
was last cleared. This information is helpful for customer service in
troubleshooting your game.
Hard Drive Self
Diagnostics
Checks the hard drive for errors, displays results, and notifies the
operator when an error is detected or a hard drive failure is
imminent. Tests can be initiated automatically and/or manually.
Содержание Megatouch FireFly
Страница 1: ...PM0773 01 Megatouch FireFly Installation Owner s Manual ...
Страница 2: ......
Страница 51: ......