background image

ETC Installation Guide

Mosaic 5" Touchscreen

Corporate Headquarters

n

Middleton, WI, USA

|

+1 608 831 4116

Global Offices

n

London, UK

|

Rome, IT

|

Holzkirchen, DE

|

Paris, FR

|

Hong Kong

Dubai, UAE

|

Singapore

|

New York, NY

|

Orlando, FL

|

Los Angeles, CA

|

Austin, TX

Web

etcconnect.com

|

Support

support.etcconnect.com

Contact

etcconnect.com/contactETC

|

© 2022 Electronic Theatre Controls, Inc.

Trademark and patent info:

etcconnect.com/ip

|

Product information and specifications

subject to change. ETC intends this document to be provided in its entirety.

7180M2161

Rev A Released 2022-11

Overview

The Mosaic 5" Touchscreen is a wall-mounted touchscreen controller that
provides dynamic control of your Mosaic system using faders, buttons,
color pickers, and more.

Lnk/Dat

Pwr/Act

1

0/100 TX PD
ETHERNET

Ethernet (PoE)

MicroSD Card

Reset Switch

Locating 
Lugs (x4)

Locking
Clip 
Receptacle
(x4)

Front View

Rear View

Universal Mounting Plate

The touchscreen ships with a universal mounting plate and regional
specific hardware for installation to a standard 1-gang US/EU/UK back
box in either portrait or landscape orientation. A surface-mount back box
is available separately.

The graphic touchscreen display configuration is designed using Mosaic
Designer Software (v2.9 and later) and can be customized to meet your
installation needs.

Environment

• For dry location use only, ambient temperature 0°C to 50°C (0°F to

122°F)

• Humidity 10–95% (non-condensing)

Electrical

The touchscreen is powered by Power-over-Ethernet (PoE 802.3af).
A standard PoE switch (provided by others) not exceeding 15 W may be
used to provide both power and a network connection to the touchscreen
using an Ethernet cable. All Ethernet terminations must follow IEEE 802.3
and be terminated to the T568B standard.

If a PoE switch is not available, a compliant PoE midspan injector may be
used alternatively. The touchscreen operates as a PoE Class 0 (zero)
device (0.44–12.95 W) and consumes 7 W maximum.

Содержание Mosaic 5

Страница 1: ...iew Rear View Universal Mounting Plate The touchscreen ships with a universal mounting plate and regional specific hardware for installation to a standard 1 gang US EU UK back box in either portrait or landscape orientation A surface mount back box is available separately The graphic touchscreen display configuration is designed using Mosaic Designer Software v2 9 and later and can be customized t...

Страница 2: ... portrait or landscape orientation Note Flush mount installations require a back box with a minimum of a 49 mm hole Use the appropriate mounting hardware for your installation back box UNC 6 32 screw for US back box M3 5 flat head screw for UK back box or M3 hex head screw for EU back box Vertical mounted back box portrait operation Horizontal mounted back box landscape operation US single gang ba...

Страница 3: ...e at a 10 degree clockwise angle where the keyholes on the touchscreen are aligned to the locating lugs on the universal mounting plate Ethernet CAT5 Ethernet CAT5 10 Locating Lugs x4 b Once all located lugs are seated to the touchscreen rotate the touchscreen 10 degrees counterclockwise securing it in place 5 Touchscreen Page 3 of 4 ETC ...

Страница 4: ...that is running compatible same or later firmware to resume operation Reset Switch Reset the touchscreen hardware by removing the device from the mounting plate see Remove Touchscreen above and pressing the recessed reset button located on the rear panel Note Do not reset the hardware during a bootloader firmware update as corruption of the data or software may occur perhaps even rendering the tou...

Отзывы: