12
E. Level two platforms and install anchor bolts.
1. Check by level bar, adjust downward screw(see Fig 20) ,level adjustment until two
platforms to both side, then adjust upward screw(see Fig 21) and make it to touch
with downward screw when lower to the lowest position, tighten nut finally.
2. Install anchor bolts.
2.1 Raise the lift to 1000mm then drill holes to install the anchor bolts
(
See Fig.22
).
Using the anchor bolt
to fix the machine
10
00
m
m
Fig. 22
Using the Level Bar for
the measurement
PI
PII
PI
PII
49
Using the anchor
bolt to fix the
control cabinet
50
Tighten nut
Upper lever screw
Lower lever screw
Tighten nut
Fig. 20
Fig. 21
