AMFLOW A6, Быстрый старт

Страница: 17 / 21

A6 Quick Start: Hart
CAUTION
Copyright
©
2016 A & H Enterprises, Inc.
All rights reserved
00000329-0900-014 * Rev. B, 06/16 Page 17 of 21
AMFLOW
®
Caution
VALVE INSTALLATION
RECOMMENDATION

The purge port on an Amflow
®
valve should be connected to a “return to
tank line” with a needle valve. This aids in the following:

Helps remove air from valve upon start-up.

Provides a means of cleaning jets with high pressure in the event of
chemical build-up.
IMPORTANT

Proper filtration is critical for low flow applications.

RECOMMENDATION: 50 micron filter
VALVE START-UP
Step 1

Turn adjustment knob counter-clockwise to a soft
“Stop”.

Then, turn one (1) revolution clock-wise.
Step 2

Close Inlet Isolation valve of
each valve in system
Step 3

Start pump

Adjust system pressure to accommodate pressure requirements
CAUTION
IMPROPER INSTALLATION AND START-UP MAY CAUSE DAMAGE
IMPORTANT
This is especially important for valves configured to flow less than 5 lph