AMF S 4000 LS, Руководство по эксплуатации и ремонту, Страница: 47 / 76

S-4000 TKF, LS Omron
1-41
Released 12/2009
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phone: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
E - MACHINE ADJUSTMENTS
1 5 . T H R E A D T E N S I O N
The thread tension influences the appearance of the sewing. A thread tension change may be needed if
the thread and fabric change. Check to be certain all parts, which contact the thread, are smooth and
polished with no burrs or sharp edges.
ŸŸŸŸŸ By turning the tension knob
➊
clockwise, the thread tension increases.
ŸŸŸŸŸ By turning the tension knob
➊
anti-clockwise, the thread tension decreases.
N O T E : Too big thread tension can cause the unsightly appearance of the sewing when sewing on a
thin and elastic material.
1. A d j u s t m e n t o f t h e t e n s io n d is c s o p e n in g
The opening of the tension discs is performed in the last phase of the sewing. When the tension
discs are opened, it is possible:
a) to pull the thread from the spool when the draw-off lever
➋
receives the impulse for
operation
b) by decreasing or increasing of the air flow it is possible to regulate the tightening of the
last loop in the sewing
www.promelectroavtomat.ru