AMF S 4000 LS, Руководство по эксплуатации и ремонту, Страница: 14 / 76

S-4000 TKF, LS Omron
1-8
Released 12/2009
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phones: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
A
-
INTRODUCTION
C o n n e c t o r
Ø
8
Ê
- order it if the connecting tube has the inner diameter 8 mm.
The connector
Ø
10 is supplied with the machine.
- part number is 12.0008.3.607
P n e u m a t ic A d a p t e r
Ë
- order it if using 1/8“ NPT
- part number 12.0008.3.081
Hand valve
Ì
- to dissipate any air from the machine, order it (air circuit is bled). It is necessary to order the
connectors (see below) to the hand valve for connection to the air tubes.
- part number 12.0008.3.463
Connectors
➍
12.0008.3.464
Ø
8 for connection to the tube with inner
Ø
8 mm
➎
12.0008.3.466
Ø
10 for connection to the tube with inner
Ø
10 mm
Ï
12.0008.3.467 Ø 12 for connection to the tube with inner Ø 12 mm*
Ð
12.0008.3.465
Ø
16 for connection to the tube with inner
Ø
16 mm*
* To connect the tube with inner
Ø
12 and
Ø
16, it is also necessary to order
Ø
10
N e e d l e g u a r d a n d c l a m p f o o t 3 / 8 “ a 3 / 4 “ k it ( f o r m a c h in e S 4 0 0 0 T K F o n l y )
- to sew in range 6,3 - 9,5 mm, use needle guard 3/8“ and clamp foot 3/8“
- to sew in range 9,5 - 19 mm, use needle guard 3/4“ and clamp foot 3/4“
- ordering numbers: needle guard 3/8“ - 20.0767.1.002
clamp foot 3/8“ - 20.0650.0.240
needle guard 3/4“ - 20.0767.1.003
clamp foot 3/4“ - 20.0650.0.340
C l a m p f o o t a s s e m b l y ( f o r m a c h in e S 4 0 0 0 L S o n l y )
- to sew maximum length 43 mm, order it
- part number 24.9920.9.989
Clamping Arm (for S4000 TKF)
- necessary to order, easier insertion of work
- for clamps 3/4“ a 3/8“ (order no. 24.3208.0.000)
Smooth clamp washer
- necessary to order, for sewing the fine material
(order no. 20.0649.1.042)
www.promelectroavtomat.ru