AMF S 4000 LS, Руководство по эксплуатации и ремонту, Страница: 45 / 76

S-4000 TKF, LS Omron
1-39
Released 12/2009
e-mail: service@amfreece.cz; parts@amfreece.cz; website: www.amfreece.com
Phone: +420 582 309 146 (Service), +420 582 309 286 (Spare Parts); Fax: +420 582 360 606
E - MACHINE ADJUSTMENTS
1 3 . H E A D C L A M P F OOT A D J U S T M E N T
1. A d j u s t m e n t f o r c l a m p h e ig h t
Be sure that air supply is switch on and the clamp foot is opened. If clamp foot is not opened, push the
clamp Up / Down button.
a) loosen the nut
Ê
b) turning the screw
➋
clockwise lowers the clamp foot mechanism
Ì
to clamp mat
Í
c) tighten the nut
Ê
NOTE: Correct height is when the underside of the clamp foot is slightly lower than the point of the
needle in the home position.
2. C l a m p f o o t t o t h e c e n t e r o f t h e n e e d l e
Be sure that the clamp foot is closed. If clamp foot is not closed, push the clamp Up / Down button.
a) turn the handwheel to be sure that needle does not hit the clamp foot
Ì
. If it hits:
b) push the clamp Up / Down button to open the clamp foot
c) loosen the screw
Î
and get the clamp foot arm further from the needle and tighten the screw
Î
d) to check this adjustment, turn the handwheel when the clamp foot is closed. The needle must
not hit the clamp foot
S4000 TKF
S4000 LS
www.promelectroavtomat.ru